Wireless DSL - Wireless T-1 service in Reading, Berks County, PA
	Today's data-driven world demands reliable solutions to connect people and things to the Internet. With our Wireless Broadband platform you can connect things faster and more affordably then most other broadband wireless offerings available today. With our 20 Megabyte per second (Mbps) Backhaul system you can realize a point-to-point solution that provides 20 Mbps bit rate and a 13 Mbps throughput, for distances up to 10 miles. -- Do you have more than one location in or around of The City of Reading? -- Do you connect multiple locations with expensive telephone circuits? -- Would you like to interface those locations into one cost efficient network? -- Would you like the fastest - most cost effective Internet delivered to your Company WITHOUT WIRES? Over the years, you've come to trust us to provide you with the most reliable communications services the industry has to offer. Maybe it's time to upgrade your bandwidth to T-1 line speeds on our Broadband High-Speed Data Network. -- Whether you need LAN connections across the street, or across town -- Want to add High Speed Internet to your business? -- Paying a fortune for s-l-o-w ISDN or DSL? -- Tired of sharing cable modem capacity with every kid in your neighborhood? We have the answer. Business Broadband for BUSINESS - ONLY FOR BUSINESS! Call TODAY for an expert evaluation of your needs. See if our Wireless Broadband is right for you!
	The central transmitter is at the top of a 150' tower on Mt. Penn, Reading, PA. Range is up to 10 miles, maybe farther, depending on tests. A clear line of sight is needed from your proposed antenna location to the tower. Clear line of sight is indicated in blue in the Coverage Map below. Notice the solid coverage in the greater Reading, PA metropolitan area. Mt. Penn: Antenna Height: 150 ft 17 Dbm Antenna 4.97 watts ERP Lat: 40° 21 Min 15 Sec Long: 75° 53 Min 56 Sec

	Coverage Area

Subscriber Module: A small Receiver-Transmitter unit. Each building needs a Subscriber Module. It consists of a single transceiver that operates with a 60-degree antenna. An optional reflector assembly is available to extend the range from 2 miles to 10 miles. SM synchronization and control is accomplished via the received AP signal. SMs may be located either indoor or outdoors, depending on the distance from the tower atop Mt. Penn. Once the SM is initialized, it automatically registers and authenticates on our system. Each SM requires a Category 5 cable with DC power supplied to the SM through that same cable. The SM kit requires a separate 110 power supply (ACPS110) and associated RJ45 connector to power the SM. Dimensions of the Subscriber Module: Radio 11.75" H x 3.4" W x 1.1" D Radio with Reflector 11.75H x 3.4W x 3.4D       Weight: 1 lb. With Reflector: 6.5 lb. Weather conditions: Rain: no affect Snow: only if the snow builds up on your Subscriber Module.

	Pricing: Click Here

1USA Link Exchange